PRODUCT DETAILS
If installation is required, please contact the vendor for service charges based on location
Features:
- Juki MF-7523 is supplied complete set includes machine head with belt type Clutch motor 250W and table stand
- Machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. The front cover is trimmed to allow operators to bring their hands closer near the needle entry area
- Feed locus is now adjustable in terms of the vertical direction and horizontal direction, thereby improving responsiveness to sewing materials.
- Longitudinal position of the feed is adjustable so uneven material feed and puckering that are likely to occur means that the machine promises improved responsiveness to elastic materials.
- It is possible to finely adjust the differential feed amount to a best-suited value for the material to be used. Differential feed ratio is constant even if the stitch length is changed.
- Elastic material or delicate material can be sewn with the presser foot kept slightly raised
- Looper thread twining prevention mechanism prevents the looper thread from twining on the looper thread cam.
- Max Sewing Speed 6500 sti/min
- Max Stitch Length 3,6 mm
- Needle Gauge 4,8 mm, 5,6mm i 6.4 mm
- Central lubrication
Warranty
Juki machine is sold on the terms of 12 months Free Service Warranty in which case the following rules must be observed:
- No attempt should be made to effect repairs or servicing other than our own service.
- Domestic Machines should not be used for industry or factory works.
- Parts required in replacement shall be at your cost.
- The Machine should always be kept well lubricated and safeguarded by dust.
